Honeywell Sensepoint XCD H2S Fixed Gas Detector
Honeywell Sensepoint XCD H2S Fixed Gas Detector range provides comprehensive monitoring of flammable, toxic, and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors.
Applications: This device is used in power plants, industrial manufacturing units, wastewater facilities, food and beverage production, Aviation industry
Honeywell Sensepoint XCD H2S Fixed Gas Detector Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation, and reduces routine maintenance time and costs. Honeywell Sensepoint XCD H2S Fixed Gas Detector has the capacity to monitor remotely. This device is designed to use flexible and it is the best solution for hard to reach areas where it needs to be separated from the sensor. With its toxic and oxygen sensor mounting, it detects up to 100 feet away from the transmitter.
Features of Honeywell Sensepoint XCD H2S Fixed Gas Detector
- Suitable for outdoor and indoor use
- stainless steel or aluminium
- It has approved by global standards
- it is easy to use, user friendly
- It undergoes an easy installation process
- Can be added accessories on a required basis
Hydrogen Sulfide (H2S)
10.0 to 100.0ppm
|1st alarm limit||
|2nd alarm limit||
-20° to 55°C
Sensepoint XCD is supplied complete with integral wall mounting plate, 2 x M20 cable entry (ATEX/IECEx) or 2 x ¾”NPT conduit entries (UL/cUL),
|Input Voltage Range||
12 to 32VDC (24VDC nominal)
|Max Power Consumption||
Maximum power consumption is dependent on the type of gas sensor being used. Electrochemical cells = 3.7W, IR = 3.7W and catalytic = 4.9W. Maximum inrush current = 800mA at 24VDC.
Sink or source.
3 x [email protected] Selectable normally open or normally closed (switch) and energized/de-energised (programmable) Alarm relays default normally open/de-energized. Fault relay default normally open/energized.
RS485, MODBUS RTU
|Material Of Construction||
• Housing: Epoxy painted aluminium alloy ADC12 or 316 stainless steel • Sensor: 316 stainless steel
Integral mounting plate with 4 x mounting holes suitable for M8 bolts. Optional pipe mounting kit for horizontal or vertical pipe Ø1.5 to 3" (2" nominal).
ULcUL versions: 2 x ¾” NPT conduit entries. Suitable blanking plug supplied for use if only 1 entry is used. Seal to maintain IP rating; ATEX/IECEx versions: 2 x M20 cable entries.
IP66 in accordance with EN60529:1992
CE: EN50270:2006 EN6100-6-4:2007
• Aluminium Alloy LM25: 2.0kg • 316 Stainless Steel: 5.0kg
There are no reviews yet.